Lost-Wax Ceramic Shell Casting

Custom Investment Casting & Post-Cast CNC Machining Services

Pour small, complex metal parts in stainless steel, carbon and alloy steel, brass, bronze, and titanium into ceramic shell moulds. Get near-net-shape ICI accuracy with in-house CNC machining, heat treatment, and finishing under one roof.

  • Stainless 316, 17-4PH & 420, carbon/alloy steel, brass, bronze & titanium
  • Wax tooling from $3,000 to $15,000 USD with no minimum order quantity (500–50,000/yr)
  • Near-net ICI linear tolerances plus 0.01 mm CNC features (0.002 mm CMM)
Machined stainless steel investment cast valve body produced on a Meco ceramic shell line
Near-net-shape stainless steel investment casting with CNC-machined sealing faces.
  • $3,000 – $15,000Low-cost wax pattern tooling
  • 0.01 mm CNCMachined features (0.002 mm CMM)
  • IATF 16949:2016X-ray, ultrasonic & dye NDT
  • Under 24 HoursCosted quote & DFM review
Wax Pattern to Finished Part

Pre-Tooling DFM & Competitive-Price Investment Casting Machining

Because the wax pattern melts out of a one-piece ceramic shell, undercuts, thin walls, and cored internal passages cast directly with no parting line and minimal machining stock — while pre-tooling DFM removes 15% to 30% of part cost.

Stainless steel investment casting showing fine as-cast surface detail before CNC machining
Fine ceramic-shell surface detail minimizes secondary CNC machining passes.
Alloys & Secondary Processes

Investment Casting Alloys & Turnkey Post-Processing

Ceramic shells withstand high pour temperatures that ruin permanent dies. Every grade ships with EN 10204 3.1 material certificates. Switch tabs below to review alloys or post-cast operations.

Material FamilyGradesWhy It Is Used & Typical Cast Parts
Stainless Steel316, 17-4PH, 420Corrosion resistance and high heat-treated strength (17-4PH); wastewater valve bodies, pump housings, custom hardware fittings, medical instruments
Carbon & Alloy SteelCarbon and alloy steelHigh tensile strength, wear resistance, and impact toughness; engine components, drivetrain linkages, levers, latches, heavy equipment wear parts
Brass & BronzeBrass, bronzeSuperior castability, bearing properties, and marine/fluid corrosion defense; pump impellers, marine fittings, bushings, architectural hardware
TitaniumTitaniumHigh strength-to-weight ratio and extreme corrosion resistance; aerospace structural fittings and chemical process hardware
Process StepIn-House CapabilityCustomer Benefit
Post-Cast CNC MachiningMilling, turning, boring, and threading to 0.01 mm and ISO 2768Precision sealing faces and bearing bores without managing a second machine shop
Heat TreatmentSolution annealing, precipitation hardening (17-4PH), normalizing to drawing specAchieves target hardness and mechanical properties prior to final machining
Surface FinishingShot blasting, polishing, powder coating, and industrial paintingClean, cosmetic, or corrosion-resistant surfaces per our surface finish chart
NDT & MetrologyCMM to 0.002 mm plus X-ray, ultrasonic, and dye penetrant NDTVerifies internal soundness and tight GD&T before shipment
Process Selection Matrix

Investment Casting vs. Sand, Die Casting & MIM

Compare where lost-wax investment casting beats sand casting, high-pressure die casting, and metal injection molding (MIM) on detail, alloy range, and tooling spend.

Feature Investment Casting Sand Casting High-Pressure Die Casting Metal Injection Molding
Typical Tolerance Near net shape per ICI ISO 8062 CT9 to CT10 NADCA standard 0.010 in Near net shape
Tooling Cost Wax tool $3,000–$15,000 Low Tool $ Patterns $500 to $5,000 Dies $20,000 to $150,000+ Tooling 6 to 10 weeks
Ideal Volume 500 to 50,000 / year (No MOQ) 50 to 5,000 / year 5,000 to 1,000,000+ 5,000 to 500,000+
Lead Time 6 to 12 weeks 4 to 8 weeks 6 to 14 weeks 6 to 10 weeks (tooling)
Metals Available Steel, SS, brass, bronze, Ti Al, steel, SS, brass, bronze Aluminum, zinc, magnesium Sintered metal powders
Part Size & Stock Small & intricate | Low stock Up to 100 kg | Highest stock Small to medium | Low stock Very small | Low stock
Best Application Valve bodies, impellers, fittings Large, low volume, prototypes Thin-wall housings at volume Small complex parts at volume

*For one-off prototypes under 100 pieces, CNC machining from bar or billet requires zero tooling. See our 2026 metal part pricing guide for full cost breakdowns.

Need Small, Complex Metal Parts Cast & Machined Under One Roof?

Send us your STEP/IGES files and annual volume. Receive a wax tooling and piece-part quote with DFM notes in 24 hours.

Get Your Casting Quote
Dimensional Control

ICI Casting Tolerances, Standards & DFM Guidelines

Review our as-cast ICI linear standards and post-cast 0.01 mm CNC machining tolerances alongside our ceramic-shell DFM rules.

ParameterMeco SpecificationNotes & Applied Standards
As-Cast ToleranceNear net shape per ICIICI linear tolerance & GB/T 6414 general specifications agreed at DFM
Dimensional StandardsISO 8062-3, ISO 286, ANSI B4.1Tighter than ISO 8062 CT9–CT10 sand casting tolerances
Machined Features0.01 mm & ISO 2768Sealing faces, bores, and threads cut on in-house CNC machining cells
CMM & NDT InspectionCMM to 0.002 mmSupported by X-ray, ultrasonic, and dye penetrant non-destructive testing

*Attach a 2D PDF drawing to nominate critical bores, threads, and mating faces for 0.01 mm post-cast CNC machining.

Design RuleEngineering RecommendationCost & Quality Impact
Wall Section UniformityKeep wall thickness consistent across the partEnsures the ceramic shell fills and cools evenly without shrinkage
Internal CornersUse smooth radii rather than sharp internal cornersPrevents shell cracking and stress concentrations during solidification
Heavy SectionsAvoid isolated heavy sections that require extra feedingReduces gating complexity, shell build time, and unit casting cost
Mating Faces & BoresAdd machining stock to every critical sealing face and boreAllows in-house CNC cells to finish features to 0.01 mm and ISO 2768
Quality Control

IATF 16949:2016 Quality, NDT & Lot Traceability

Every investment casting cell operates under IATF 16949:2016 (incorporating ISO 9001:2015), delivering full lot and serial traceability from melt to final shipment.

Inspection StageVerification MethodDeliverables
Alloy & Melt (IQC)Chemical composition verification per heat lotEN 10204 3.1 & CoA
Internal Integrity (NDT)X-ray radiography, ultrasonic testing & dye penetrantNDT Inspection Reports
Dimensional MetrologyCMM verification resolving to 0.002 mm on machined featuresFAIR & PPAP Submissions

Complete PPAP, First Article Inspection (FAI), Certificate of Analysis (CoA), and EN 10204 3.1 documentation supplied on request.

Industries & Applications We Cast For

Stainless steel investment cast valve body with cored internal passage
316 Stainless Valve BodyCored Internal Passage | CNC Sealing Faces
Heavy duty investment cast steel base with machined mounting faces
Alloy Steel Structural BaseNear-Net Ceramic Shell | Milled Mounting Faces
Investment cast industrial component showing fine surface detail
Complex Hardware FittingOne-Piece Wax Pattern | Zero Parting Line
Investment cast valve assembly with machined sealing faces
Machined Valve Assembly0.01 mm Bores & Threads | 0.002 mm CMM Verified

Swipe to view recent investment cast parts.

Frequently Asked Questions

How much does investment casting wax tooling cost, and what drives part price?

Wax tooling runs $3,000 to $15,000 USD — well below a permanent gravity or die casting die. Unit price depends on pattern complexity, shell build time, alloy grade, part weight, annual volume, and required CNC machining or finishing. Free DFM changes agreed before cutting the wax tool typically remove 15% to 30% of part cost.

What alloys can Meco pour via custom investment casting?

We pour stainless steel (316, 17-4PH, and 420), carbon and alloy steel, brass, bronze, and titanium. Because the ceramic shell is disposable, it handles high-melting-point, wear- and corrosion-resistant alloys that would destroy a permanent die casting mould. Every lot ships with EN 10204 3.1 material certificates on request.

What tolerances can your investment casting and CNC machining cells hold?

Castings arrive near net shape to ICI linear tolerance (alongside GB/T 6414, ISO 8062-3, ISO 286, and ANSI B4.1 standards), which is significantly tighter than ISO 8062 CT9–CT10 sand casting. For critical sealing faces, bores, and threads, we machine features in house to 0.01 mm and ISO 2768, verified on a CMM resolving to 0.002 mm.

How do I choose between investment casting, sand casting, die casting, and MIM?

Investment casting wins on small, intricate parts in hard alloys (stainless, steel, titanium) at 500 to 50,000 parts a year because it leaves minimal machining stock. Sand casting wins on large parts up to 100 kg or runs under 500 pieces ($500–$5,000 patterns). Die casting wins above 5,000 parts a year but is limited to aluminum, zinc, and magnesium. For very small complex parts at high volume, consider metal injection molding (MIM).

What is your minimum order quantity (MOQ) and production lead time?

We have no minimum order quantity (no MOQ) — supporting single-piece prototypes through economical runs of 500 to 50,000 parts per year. Quotes with DFM feedback return inside 24 hours, and production lead time is 6 to 12 weeks from approved wax tooling and released PO.

How to Get Started

1
Submit CAD Files & Specs

Send your STEP or IGES file with alloy, annual volume, tolerances, and finish. Response in under 24 hours.

2
DFM Review & Cost Breakdown

Receive itemized wax tooling and piece pricing plus DFM notes on wall sections, radii, and machining stock to cut cost by 15–30%.

3
Wax Tooling & First Articles

We build the wax tool ($3,000–$15,000), pour the ceramic shell, and deliver first articles with CMM and NDT reports.

✓
Mass Production, Machining & Delivery

After PPAP approval, we run casting, 0.01 mm CNC machining, heat treatment, and finishing, shipping from North America or Asia.

Send Your Files, Get a Reply in 24 Hours

Prototype or production, we review every request and reply with clear next steps.

  • Engineering feedback with every quoteWe review your files and reply with manufacturing feedback that can reduce cost.
  • Send what you haveUpload drawings or 3D models, or describe the part and we'll help define the rest.
  • Prototype to production, no minimum orderStart with one sample and scale to repeat production runs.
  • One partner, 40+ processesMachining, casting, forging, stamping, finishing and assembly, under an IATF 16949:2016 quality system.
Prefer to talk? Call our Richmond Hill office +1 416 781 3399

By submitting, you agree to Meco’s privacy policy. We’ll never share your information.