One Partner Makes Your Whole Product
From your first idea to millions of finished parts, we handle every step in our own factories. That means 40+ ways to make things, one quality system, and no middlemen adding cost or delays.
- No minimum order size
- Make 10 parts or 10 million and more
- Warehouses in the US, Canada, Japan & Thailand
Need Someone to Make Your Product?
It does not matter if you have a rough sketch on a napkin or a finished set of design files. We meet you wherever you are and take you all the way to boxed, ready-to-sell products, under one roof.
Because we own our factories and run 40+ processes ourselves, you never have to chase down extra suppliers or worry about parts that do not fit together.
See How It WorksJust an idea?
Our R&D team turns your concept into 3D models and working prototypes you can hold and test.
Have design files?
Send them over. We quote in under 24 hours, share ways to save money, then build, finish, and ship.
Need to grow?
Stay with the same partner from 10 parts to 10 million and more. No new vendors and no gaps to manage.
One Partner vs. Many Suppliers
When you juggle 5 to 10 vendors, there are 5 to 10 places where things can slow down or go wrong. Here is what changes the moment you bring it all under one roof.
How It Works
Getting your product made should feel simple. We break it into six clear steps, from your first file all the way to boxes at your door. Open each step to see exactly what happens.
Start Your Project01Send Your Files
Upload your design files, parts list, and material needs. It takes about 5 minutes, and if you are missing anything, our team will help you fill in the gaps.
02Get a Quote
Our engineers review your design and send a full quote in under 24 hours. They also point out simple changes that can make the part cheaper or easier to build.
03Build the Tools
We make the molds, dies, and fixtures right here in our own shops, then run the first samples. This step usually takes 3 to 6 weeks.
04Check the Samples
We measure every sample to ±0.002 mm and send you a full report. Nothing moves to big production until you look it over and approve it.
05Make It All
Full production begins with quality checks running the whole time. We handle any size, from 10 parts to 10 million and more, on the same lines.
06Pack & Ship
We package, label, and ship worldwide through our warehousing and fulfillment network, with a 99.8% on-time record.
Ready to Simplify Your Supply Chain?
Get a full quote with real design feedback in under 24 hours. One partner takes you from start to finish.
Visibility, Quality & Compliance
The same IATF 16949:2016 system that governs Tier 1 automotive supply runs across every stage of your chain, from raw material intake to final shipment, with real-time visibility throughout.
IATF 16949:2016
Automotive-grade QMS applied end to end, from sourcing through logistics.
Real-Time Visibility
Live tracking of inventory, production status, and shipments across the chain.
APQP / PPAP / SPC
Launch and process-control documentation on every program.
CMM Inspection
Full GD&T verification to ±0.002 mm with deviation reports.
Full Traceability
Lot and serial tracking from raw material through delivery.
Audit-Ready Docs
FAI, material certs, CoA, and control plans with every shipment.
REACH / RoHS / CMRT
Regulatory and conflict-minerals compliance documentation.
Performance
99.99% quality rate and 99.8% on-time delivery across all programs.
Common Questions
What is turnkey contract manufacturing?
It means one company handles everything for you, from design help and prototypes to production, assembly, packaging, and shipping. You work with a single partner instead of managing many separate vendors. Learn more here.
Is there a minimum order?
No. We make anywhere from 10 sample parts to 10 million and more on the same lines, so you can start small and scale up whenever you are ready.
How fast can I get a quote?
Usually under 24 hours, complete with design feedback that can save you money. Once you approve, first samples typically take 3 to 6 weeks.
Can you make metal and plastic parts?
Yes. We run die casting, CNC machining, and plastic injection molding, plus finishing and assembly, all in-house across 40+ processes.
What if I only have an idea?
That is a great place to start. Our R&D team helps turn your concept into a real product. For a quick overview, read our guide on how to get your invention made.
Get Started
Upload your files and requirements.
Full quote in under 24 hours.
Inspected samples for your sign-off.
Full runs and worldwide shipping.
Get Your Free Quote
No commitment · Response in under 24 hours
By submitting, you agree to Meco’s privacy policy. We’ll never share your information.
