METAL/PLASTIC PRODUCTS

Features:

a) ODM parts, design involved and DFM provided
b) Material:Zamak 3
c) Consists of Zinc parts, plastic injection molding parts and fasterners
d) Process included: injection molding, Zinc die casting, assembling, function test
e) Package design and retail package provided
f) Low tooling cost input

Features:

a) Appliance parts
b) Aluminum: 6061 T6, 6063 T5
c) By extrusion
d) CNC machining applied
e) Powder coating finish
f) Film thickness test, UV test, Salt spray test applied

Features:

a) ODM parts, design involved and DFM provided
b) Material:Zamak 3
c) Consists of  Zinc parts, plastic injection molding parts and fasterners
d)  Process included: injection molding, Zinc die casting, assembling, function test
e)  Package design and retail package provided
f)  low tooling cost input

Features:

a) ODM parts, design involved and DFM provided
b) Material:Zamak 3
c) Consists of  Zinc parts, plastic injection molding parts and fasterners
d) Process included: injection molding, Zinc die casting, assembling, function test
e) Package design and retail package provided
f) Low tooling cost input

Features:
a) Aluminum die castings for monitor arms.
b) Aluminum: A380/ADC12
c) By high pressure die casting
d) CNC machining applied
e) Impregnation(porous sealing) process applied
f) Leak test applied
g) X-ray or CT test, per DBL 4949 or ASTM E505
f) Surface finish: Powder coating
 
 

Features:
a) Weight wheels for cars,motorcycles
b) Zamak 5
c) By high pressure die casting
d) With powder coating finish
e) Attached with 3M tapes
f) 0.5 ounce
 
 
 

Process introduction:
 
The powder coating process is to spray on the surface of the parts with an electrostatic spray machine. Under the work of static electricity, the powder will be uniformly adsorbed on the surface of the workpiece to form a powder coating layer. The powder is cured by high temperature baking and leveling, so that different spraying effects are obtained by using different powder.
 
Our treatment process:
 
Degreasing->Rinsingg->Rinsing(pure water best)>nano-oxide film->Rinsing->Pure water rinsing>Drying >Painting
 
Characteristic:
 
a) Free phosphate and nickel and chromium heavy metals. （RoHs/CALIFORNIA PROP. 65 COMPLIANT)
b) Almost no sediment during the process, which reduces the waste water treatment and environmental burden.
 
Powder coating effect: we can do satin, semi-matte, matte, sand grain, hammer grain, crack grain and other different effects.
 
Our standard test:
 
a) Salt spray test
b) Impact test
c) Bending test
d) Cross-cut test, adhesion test
f) Pencil hardness test
g) Color difference/chromatic aberration detection
h) Gloss check
i) Thickness test
 
Additional test per customer's request:
a) RoHs test
b) UV test
c) Damp heat test
d) Xenon lamp test, Florida exposure test