 |
|
| |
Advantages:
a) High accuracy and coinsistance.
b) Hot forging, warm forging and cold forging all capable.
c) Wide range of material could be applied, including A) steel: 1) Carbon steel: like ASTM 1020; ASTM1045; 2) Alloy steel: like 20Cr, 20Mncr5, 35CrMo, 42CrMo, ASTM 4140, ASTM8620; 3) Stainless steel: like SS201,SS301, SS303, SS304,SS316,SS410,SS430, SS630,17-7PH,1.4301; B) Aluminum: like 5052, 6063,6061,7075; C) Brass and Bronze: like C36000, C63000,C48500.
d) Low cost mold can be customized per low volume products.
e) Production/tooling development cycle could be 7~15 days.
f) Thoughtful DFM analysis and engineering support could be offered before project launching and tooling development, inlcuding forging streamline analysis.
g) Prototype can be produced and offered before tooling launching.
h) Reliability test applied, including slice and stremline test, nondestructive inspection like X-ray inspection, Eddy current inspection, Magnetic powder inspection, Ultrasonic test could also be applied.
i) Mutiple surface finish can be applied like powder coating,wet painting, plating, E-coating.,etc.
Advantages:
a) High accuracy and coinsistance.
b) Hot forging, warm forging and cold forging all capable.
c) Wide range of material could be applied, including A) steel: 1) Carbon steel: like ASTM 1020; ASTM1045; 2) Alloy steel: like 20Cr, 20Mncr5, 35CrMo, 42CrMo, ASTM 4140, ASTM8620; 3) Stainless steel: like SS201,SS301, SS303, SS304,SS316,SS410,SS430, SS630,17-7PH,1.4301; B) Aluminum: like 5052, 6063,6061,7075; C) Brass and Bronze: like C36000, C63000,C48500.
d) Low cost mold can be customized per low volume products.
e) Production/tooling development cycle could be 7~15 days.
f) Thoughtful DFM analysis and engineering support could be offered before project launching and tooling development, inlcuding forging streamline analysis.
g) Prototype can be produced and offered before tooling launching.
h) Reliability test applied, including slice and stremline test, nondestructive inspection like X-ray inspection, Eddy current inspection, Magnetic powder inspection, Ultrasonic test could also be applied.
i) Mutiple surface finish can be applied like powder coating,wet painting, plating, E-coating.,etc.
